넳 넲

DMCHA

Chemical Name	N,N-dimethylcyclohexylamine	Product Code	MRCAT DMCHA
CAS Number	98-94-2	Molecular Formula	C8H17N
Typical Properties	Appearance	Colorless to light yellow transparent liquid
	Purity/%	≥ 98.5
	Refractive Index (20 ℃)	1.4525-1.4545
	Flash Point	40-41 ℃
	Water Content	0.25% max
	Density (25 ℃)	0.85-0.87g/cm³;
Application	MRCAT DMCHA is as a catalyst for rigid polyurethane foam. It is a low viscosity medium amine catalyst for refrigerator rigid foam, plate, spraying, and on-site infusion of polyurethane rigid foam. The catalyst has a catalytic effect on both gel and foaming, and provides a more balanced catalytic performance for the foaming reaction and gel reaction of rigid foam. It has a stronger catalytic effect on the reaction of water and isocyanate (foaming reaction), and also has a moderate catalytic effect on the reaction of polyol and isocyanate. It is a strong initial catalyst for foam reaction. In addition to the hard foam, it can also be used as an auxiliary foaming agent for molding soft foam and semi-hard foam. In the combination of stable performance, adjustable, and can be stored for a long time. MRCAT DMCHA can be used as a separate catalyst, but is generally used in combination with other catalysts. Depending on the reaction rate and the physical properties of the foam, the amount of MRCAT DMCHA per 100 parts by mass of polyether polyol is between 0.5 and 3.5 parts by mass. MRCAT DMCHA can also be used as a stabilizer for fuel oil to prevent the formation of oil residue. It is a stable additive for petroleum fractions at 150-480 ℃. Raw materials for medicine and pesticides, as well as fungicides, disinfectants, leveling agents and antistatic agents.
Package	170kg/Drum or 850kg/IBC or as customer need

Back to Product＞＞

Contact us＞＞

Hot Products

DMCHA

MRCAT DMCHA is as a catalyst for rigid polyurethane foam. It is a low viscosity medium amine catalyst for refrigerator rigid foam, plate, spraying, and on-site infusion of polyurethane rigid foam. The catalyst has a catalytic effect on both gel and foaming, and provides a more balanced catalytic performance for the foaming reaction and gel reaction of rigid foam. It has a stronger catalytic effect on the reaction of water and isocyanate (foaming reaction), and also has a moderate catalytic effec

PMDETA

MRCAT PMDETA is a highly active strong foaming polyurethane catalyst, which is also used to balance the overall foaming and gel reactions. It is widely used in all kinds of polyurethane rigid foam, including polyisocyanurate sheet rigid foam, can improve the foam fluidity, so it can improve the production process and improve the quality of products. MRCAT PMDETA can be used alone as a catalyst for polyurethane foam formulations or with other catalysts such as MRCAT DMCHA. When used alone as the

DMEA

MRCAT DMEA has a wide range of uses, such as the preparation of water-diluted coatings; it is also the raw material of dimethyl aminoethyl methacrylate, which is used to prepare antistatic agents, soil conditioners, conductive materials, paper additives and flocculants; It is also used for water treatment to prevent boiler corrosion. It is also used in the synthesis of bis (dimethylaminoethyl) ether.

BDMA

N,N-dimethyl benzylamine is a polyester polyurethane block soft foam, polyurethane rigid foam, adhesive and coating catalyst, mainly used for rigid foam, can make polyurethane foam has good early fluidity and uniform cell, foam and substrate has good bonding force.
In the field of organic synthesis, it is mainly used as a dehydrohalogenation catalyst and acid neutralizer for organic drug synthesis, as well as for the synthesis of quaternary ammonium salts and the production of cationic surface a

DBTDL

Heat stabilizer for the production of soft and transparent PVC products, which can prevent vulcanization pollution.
As a polyurethane catalyst, it is widely used in polyurethane foams, coatings and adhesives. Promote the rapid curing of one-component moisture curing PU paint and two-component PU paint.

BDMAEE

Used in the production of soft transparent PVC products heat stabilizer, can prevent vulcanization pollution.
As a polyurethane catalyst, it is widely used in polyurethane foams, coatings and adhesives. Promote the rapid curing of one-component moisture curing PU paint and two-component PU paint.

DMDEE

MRCAT DMDEE is a strong foaming catalyst, due to the steric effect of amino groups, can make the NCO-containing components have a long storage life. Mainly used for one-component rigid polyurethane foam system, can also be used for polyether and polyester polyurethane flexible foam, semi-rigid foam, CASE materials.

DABCO T

MRCAT T is a reactive foaming catalyst with low atomization and low pollution to PVC. It is used for low density polyether polyurethane soft foam, molded foam, semi-hard foam and hard foam, especially recommend for automobile foam and packaging foam.

DMAEE

MRCAT PC37 is a low odor reactive foaming catalyst for polyurethane rigid foam, and can also be used for molded soft foam and polyether polyurethane soft block foam. Can be used alone, and often shared with MRCAT AC33.

DMI

Used as an epoxy resin curing agent, it can be widely used in epoxy resin bonding, coating, pouring, sealing, impregnation and composite materials.

NMI

Organic synthesis intermediates and resin curing agents, adhesives, etc. Can be used for casting, bonding and glass steel and other fields;

넳 넲