넳 넲

PMDETA

Chemical Name	N,N,N',N,'N'-Pentamethyldiethylenetriamine	Product Code	MRCAT PMDETA
CAS Number	3030-47-5	Molecular Formula	C9H23N3
Typical Properties	Appearance	Colorless to light yellow clear liquid
	Purity/%	≥ 99
	Refractive Index (20 ℃)	1.4430-1.4440
	Flash Point (PMCC)	83.3 ℃
	Water Content	0.25% max
	Relative Density (20 ℃)	0.8302-0.8306g/cm³
Application	MRCAT PMDETA is a highly active strong foaming polyurethane catalyst, which is also used to balance the overall foaming and gel reactions. It is widely used in all kinds of polyurethane rigid foam, including polyisocyanurate sheet rigid foam, can improve the foam fluidity, so it can improve the production process and improve the quality of products. MRCAT PMDETA can be used alone as a catalyst for polyurethane foam formulations or with other catalysts such as MRCAT DMCHA. When used alone as the rigid foam catalyst, the amount used ranges from 1.0 to 2.0 parts by mass per 100 parts by mass of the polyol. In addition to rigid foam formulations, MRCAT PMDETA can also be used in the production of polyether polyurethane soft block foams and molded foams. For example, 70% of MRCAT PMDETA is mainly used in the formulation of flexible foam products, which have high catalytic activity, fast foaming speed, high toughness and high bearing capacity. A preferable effect can be obtained by 0.1 to 0.5 parts by mass of the catalyst per 100 parts by mass of the polyether in the flexible foam. MRCAT PMDETA quaternary ammonium salt is a soft foam delay catalyst, which is used to extend the whitening time of foaming, suitable for complex shape foam products and box foaming process, improve the cell structure and improve the molding quality. Its own dosage range is quite wide, and the change of dosage has no obvious effect on the milky white time, but increasing the dosage can shorten the foam rise time and shorten the curing time.
Package	170KG/DRUM or 850KG/IBC or Upon clients' request

Back to Product＞＞

Contact us＞＞

Hot Products

DMCHA

MRCAT DMCHA, primarily used as a catalyst for rigid foam, is a low viscosity, medium basicity amine catalyst with broad applications, particularly in the production of refrigerator rigid foam, panels, spray applications, and on-site pouring of polyurethane rigid foam. This catalyst has a catalytic effect on both gelation and foaming, providing a balanced catalytic performance.

PMDETA

MRCAT PMDETA is a highly active strong foaming polyurethane catalyst, which is also used to balance the overall foaming and gel reactions. It is widely used in all kinds of polyurethane rigid foam, including polyisocyanurate sheet rigid foam, can improve the foam fluidity, so it can improve the production process and improve the quality of products. MRCAT PMDETA can be used alone as a catalyst for polyurethane foam formulations or with other catalysts such as MRCAT DMCHA. When used alone as the

DMEA

MRCAT DMEA has a wide range of uses, such as the preparation of water-diluted coatings; it is also the raw material of dimethyl aminoethyl methacrylate, which is used to prepare antistatic agents, soil conditioners, conductive materials, paper additives and flocculants; It is also used for water treatment to prevent boiler corrosion. It is also used in the synthesis of bis (dimethylaminoethyl) ether.

BDMA

N,N-dimethyl benzylamine is a polyester polyurethane block soft foam, polyurethane rigid foam, adhesive and coating catalyst, mainly used for rigid foam, can make polyurethane foam has good early fluidity and uniform cell, foam and substrate has good bonding force.
In the field of organic synthesis, it is mainly used as a dehydrohalogenation catalyst and acid neutralizer for organic drug synthesis, as well as for the synthesis of quaternary ammonium salts and the production of cationic surface a

DBTDL

Heat stabilizer for the production of soft and transparent PVC products, which can prevent vulcanization pollution.
As a polyurethane catalyst, it is widely used in polyurethane foams, coatings and adhesives. Promote the rapid curing of one-component moisture curing PU paint and two-component PU paint.

BDMAEE

Used in the production of soft transparent PVC products heat stabilizer, can prevent vulcanization pollution.
As a polyurethane catalyst, it is widely used in polyurethane foams, coatings and adhesives. Promote the rapid curing of one-component moisture curing PU paint and two-component PU paint.

DMDEE

MRCAT DMDEE is a strong foaming catalyst, due to the steric effect of amino groups, can make the NCO-containing components have a long storage life. Mainly used for one-component rigid polyurethane foam system, can also be used for polyether and polyester polyurethane flexible foam, semi-rigid foam, CASE materials.

DABCO T

MRCAT T is a reactive foaming catalyst with low atomization and low pollution to PVC. It is used for low density polyether polyurethane soft foam, molded foam, semi-hard foam and hard foam, especially recommend for automobile foam and packaging foam.

DMAEE

MRCAT PC37 is a low odor reactive foaming catalyst for polyurethane rigid foam, and can also be used for molded soft foam and polyether polyurethane soft block foam. Can be used alone, and often shared with MRCAT AC33.

DMI

Used as an epoxy resin curing agent, it can be widely used in epoxy resin bonding, coating, pouring, sealing, impregnation and composite materials.

NMI

Organic synthesis intermediates and resin curing agents, adhesives, etc. Can be used for casting, bonding and glass steel and other fields;

넳 넲