넳 넲

DABCO T

Chemical Name

 N,N,N'-trimethylaminoethylethanolamine

Product Code

MRCAT T

CAS Number

2212-32-0

Molecular Formula

C7H18N2O

Typical  Properties

 

Appearance

Colorless to light yellow liquid

Purity/%

≥ 98

Viscosity (25 ℃)

5-7mPa.s

Relative Density (25 ℃)

0.90-0.91

Flash Point (PMCC)

88°C

Water Content%

≤ 0.5

Chroma

≤ 50

Application

MRCAT T is a reactive foaming catalyst with low atomization and low pollution to PVC. It is used for low density polyether polyurethane soft foam, molded foam, semi-hard foam and hard foam, especially recommend for automobile foam and packaging foam.

Package

180KG/DRUM or 850KG/IBC or Upon clients' request
Back to Product＞＞
Contact us＞＞

Hot Products

DMCHA
MRCAT DMCHA, primarily used as a catalyst for rigid foam, is a low viscosity, medium basicity amine catalyst with broad applications, particularly in the production of refrigerator rigid foam, panels, spray applications, and on-site pouring of polyurethane rigid foam. This catalyst has a catalytic effect on both gelation and foaming, providing a balanced catalytic performance.
¥ 0.00
PMDETA
MRCAT PMDETA is a highly active strong foaming polyurethane catalyst, which is also used to balance the overall foaming and gel reactions. It is widely used in all kinds of polyurethane rigid foam, including polyisocyanurate sheet rigid foam, can improve the foam fluidity, so it can improve the production process and improve the quality of products. MRCAT PMDETA can be used alone as a catalyst for polyurethane foam formulations or with other catalysts such as MRCAT DMCHA. When used alone as the
¥ 0.00
DMEA
MRCAT DMEA has a wide range of uses, such as the preparation of water-diluted coatings; it is also the raw material of dimethyl aminoethyl methacrylate, which is used to prepare antistatic agents, soil conditioners, conductive materials, paper additives and flocculants; It is also used for water treatment to prevent boiler corrosion. It is also used in the synthesis of bis (dimethylaminoethyl) ether.
¥ 0.00
BDMA
N,N-dimethyl benzylamine is a polyester polyurethane block soft foam, polyurethane rigid foam, adhesive and coating catalyst, mainly used for rigid foam, can make polyurethane foam has good early fluidity and uniform cell, foam and substrate has good bonding force.
In the field of organic synthesis, it is mainly used as a dehydrohalogenation catalyst and acid neutralizer for organic drug synthesis, as well as for the synthesis of quaternary ammonium salts and the production of cationic surface a
¥ 0.00
DBTDL
Heat stabilizer for the production of soft and transparent PVC products, which can prevent vulcanization pollution.
As a polyurethane catalyst, it is widely used in polyurethane foams, coatings and adhesives. Promote the rapid curing of one-component moisture curing PU paint and two-component PU paint.
¥ 0.00
BDMAEE
Used in the production of soft transparent PVC products heat stabilizer, can prevent vulcanization pollution.
As a polyurethane catalyst, it is widely used in polyurethane foams, coatings and adhesives. Promote the rapid curing of one-component moisture curing PU paint and two-component PU paint.
¥ 0.00
DMDEE
MRCAT DMDEE is a strong foaming catalyst, due to the steric effect of amino groups, can make the NCO-containing components have a long storage life. Mainly used for one-component rigid polyurethane foam system, can also be used for polyether and polyester polyurethane flexible foam, semi-rigid foam, CASE materials.
¥ 0.00
DABCO T
MRCAT T is a reactive foaming catalyst with low atomization and low pollution to PVC. It is used for low density polyether polyurethane soft foam, molded foam, semi-hard foam and hard foam, especially recommend for automobile foam and packaging foam.
¥ 0.00
DMAEE
MRCAT PC37 is a low odor reactive foaming catalyst for polyurethane rigid foam, and can also be used for molded soft foam and polyether polyurethane soft block foam. Can be used alone, and often shared with MRCAT AC33.
¥ 0.00
DMI
Used as an epoxy resin curing agent, it can be widely used in epoxy resin bonding, coating, pouring, sealing, impregnation and composite materials.
¥ 0.00
NMI
Organic synthesis intermediates and resin curing agents, adhesives, etc. Can be used for casting, bonding and glass steel and other fields;
¥ 0.00
넳 넲
  • 끅

    • customer service telephone numbers

    • +86-25-8666 5908
  • 뀩
  • 뀥

    • 服务时间

    • 周一至周五 9:00-18:00
  • 낃

    • QR code

  • 녕